I’m still here. I haven’t been able to keep up with the blogging since last weeks crew change. Priorities have changed. I’ve been much more busy. Pretty much the entire crew changed out. The only ones left were me, the medic, the crane operator and most of the galley crew (3 guys). There are only 20 of us total on here now. Usually there are about 200.
We have a new captain. I was made MSL (marine section leader), which is basically the oilfield way of saying Chief Mate. The problem with that is that I was sent out here to be a DPO, with a contract and pay as a DPO. There is a whole ‘nother level of responsibilty that I have now, that I didn’t plan on and don’t really want. Especially if I’m not going to be paid for it.
It’s hard trying to keep any vessel in shape with a minimal crew. This is not just any vessel. I would say it is fairly unique. I have been here for about 3 weeks now and I’m still getting lost when I go below decks! It’s a lot more complicated than a ‘regular ship’.
They have 4 engine rooms (2 engines each), with switchboard rooms for each engine room. They have separate pump rooms for the drillers, ballast, drains, etc. We have 4 separate thruster rooms (2 thrusters each). They are all the way down, practically at the bottom of the ship. There is another level below with just ballast tanks and pumps.
I was down there this afternoon, wandering around, checking some items for the PM’s (preventive maintenance) that still needs to get done. The ship is round, so you go around in circles to check each thruster room. I did fine with that. The problem was when I wanted to go back up to the main deck. The thrusters are on the 3.5m level. The engine rooms are on the 28.5, 32.5 level (up from 0). The cargo elevator that usually runs to access those spaces is broken.
I found out that you can’t easily get out of the thruster rooms without climbing up a 20′ vertical ladder with a hatch to open on top. I thought about trying it, but my arms and upper body strength is not something I feel too confident about.
We did PM’s on the HiPAP (high precision acoustic positioning) transducer poles this morning. My bosun (on here as roustabout) had a heck of a hard time climbing out of that space. It is a loooooong way down! Vertical ladders are tough enough even you are in good physical shape.
My DPO and roustabout were both worn out after 3 times up and down those ladders. Both of them are young and look to be in pretty good shape. I figure the valves are on the 0 elevation level, so it’s about 75 ft straight up. My arms would be jelly!
I tried 2 different ways to get out of different thruster rooms before I finally wound up back where I came down. I wasn’t going to try opening a hatch while standing at the top of a vertical ladder and nobody around to help. I went back up that way. I was pretty pooped by that time.
I’ll update this later with pictures. I’ve been having a hard time with my computer getting anything done online, so it might take a little while. Hang in there. 😉